Huawei USG6000E Series Hardware Manual page 255

HUAWEI USG6000E Series
Hardware Guide
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
5. 40GE optical
port indicator
Table 4-105 Indicators on the USG6630E
Silkscreen
PWR
SYS
Issue 08 (2022-04-20)
2. OFL
indicator
NOTE
Only the
models whose
BOM number
contain "-001"
and "-002"
support the
OFL indicator.
6. MGMT port
indicator
NO TE
● GE electrical interface indicators from left to right correspond to GE electrical interfaces
in ascending order. For example, the first indicator on the panel corresponds to
GigabitEthernet0/0/0 and the second indicator corresponds to GigabitEthernet0/0/1.
● Arrowheads of optical ports show the positions of the ports. A down arrowhead
indicates a port in the upper part, and an up arrowhead indicates a port in the lower
part.
Name
Power
indicator
System
indicator
Copyright © Huawei Technologies Co., Ltd.
2. GE electrical 3. 10GE optical
port indicator port ACT
indicator
7. RST button 8. OFL button
Color Status
Green Steady on
- Off
Green Steady on
Green Blink every
two seconds
(0.5 Hz)
Green Blink four
every second
(4 Hz)
4 Hardware Overview
4. 10GE optical
port LINK
indicator
-
Description
The power
module works
properly.
The power
module is
faulty or the
power cable is
disconnected.
The system is
being
powered on
or restarted.
The system is
running
normally.
The system is
starting.
248