Table of Contents
Advertisement
HUAWEI USG6000E Series
Hardware Guide
----End
Follow-up Procedure
Perform the following checks after the installation:
●
●
5.3.1.2 Mounting a Device on a Workbench
If you do not have a cabinet, you can mount the USG6510E, USG6510E-POE,
USG6530E on a workbench.
Precautions
Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
The workbench must be:
●
●
Accessories
Four rubber feet
Procedure
Step 1 Fix the rubber feet to the round notches at the bottom of the USG.
Step 2 Place the USG on the workbench.
Issue 08 (2022-04-20)
Ensure that the USG is placed securely inside the cabinet.
Ensure that the exhaust of the USG is not blocked by other objects.
Reliably grounded.
Clean, firm, and securely installed.
NO TE
Install foot pads at the bottom of the USG to ensure smooth contact between the USG and
the workbench and avoid friction between the surface of the USG and the workbench.
Copyright © Huawei Technologies Co., Ltd.
5 Hardware Installation
515
Hide quick links:
Advertisement
Table of Contents
