Huawei USG6000E Series Hardware Manual page 566

HUAWEI USG6000E Series
Hardware Guide
5.4.8 Powering On or Off the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B,
USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E,
USG6655E
This section describes how to power on or off the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E,
USG6630E, USG6635E, USG6650E, USG6655E. To ensure the normal start and
security of the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E,
USG6565E, USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E,
USG6615E, USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E,
strictly follow the operation guide to power on or off the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B, USG6610E, USG6615E, USG6620E, USG6625E,
USG6630E, USG6635E, USG6650E, USG6655E.
Context
Before you power on the USG, ensure that:
●
●
Procedure
●
Issue 08 (2022-04-20)
The power cable and PGND cable are properly connected.
The power switch in the equipment room is easy to locate so that you can
power off devices in the case of accidents.
Power on the USG.
Turn on the switch of the power supply device. The USG starts.
You can identify the USG status based on indicators on the front and rear
panels. Indicators shown in
Copyright © Huawei Technologies Co., Ltd.
Figure 5-36 indicate that the USG runs normally.
5 Hardware Installation
559