Assigning The Sitop Ups1600 To A Controller - Siemens SITOP UPS1600 Equipment Manual

Engineering and remote access
3.4 SIMATIC STEP 7 in the TIA Portal
3. If you use the SITOP UPS1600 with the hardware support package:
In the "Catalog" palette, navigate to SITOP UPS1600 under "Power supply and
distribution\Power supplies\SITOP UPS\UPS1600".
4. If you use the SITOP UPS1600 with the generic station description file:
In the "Catalog" palette, navigate to the SITOP UPS1600 under "Other field devices\PROFINET
IO\I/O\SIEMENS AG\UPS1600".
5. Select the required SITOP UPS1600 width a mouse click.
In the "Information" area you can see information about the selected SITOP UPS1600, and if
necessary change the preselected version.
6. Drag the SITOP UPS1600 and drop it into the Network view.
Alternatively, you can add the module to the Network view by double-clicking on the
entry in the hardware catalog.
You have now inserted the SITOP UPS1600 into the project. The rectangle displayed in the
network view symbolizes the SITOP UPS1600.
3.4.5

Assigning the SITOP UPS1600 to a controller

To be able to use the SITOP UPS1600 you must assign an IO controller as IO device.
1. Click in the network view on the blue lettering "Not assigned" at the left next to the symbol
of the SITOP UPS1600.
66
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76