Thirdpartybatteryparameter - Siemens SITOP UPS1600 Equipment Manual

Display name Data type
AlarmLessCapable Boolean
ModuleDetected
AlarmMoreCapable Boolean
ModuleDetected
AlarmNewBattery Boolean
Detected
AlarmUnexpected Boolean
ModuleDetected
AlarmWrong Boolean
BatteryConfiguration
Additional parameters
Display name Data type
BatteryModule UInt32
IdentNumber
DeviceManual String
HardwareRevision String
Manufacturer LocalizedText
Model LocalizedText
OrderNumber String[20]
RevisionCounter Int32
SerialNumber String[16]
SlotId UInt16
SoftwareRevision Integer
VersionNumber String
3.10.6.23

ThirdPartyBatteryParameter

Display name Data type
BatteryCapacitySet- Float
point
BatteryDefectVoltage Float
Setpoint
BatteryDurationCon- UInt16
stantVoltagePhaseSet-
point
BatteryTypeSetpoint Byte
ChargeCurrentSetpoint Float
OperatingTemperature Sbyte
Setpoint
StartOfPreserveVoltage Float
Setpoint
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76
Definition Description
PropertyType Battery module with reduced power detected.
PropertyType A battery module with excessive power detected.
PropertyType A new battery was connected. The battery will be included in
the calculation of the total capacity and the charge parame-
ters.
PropertyType Unexpected module type detected.
PropertyType Wrong battery configuration
Definition Description
PropertyType Module identification number
PropertyType Address (path in the file system or URL/web address) of the
operating instructions for the unit.
PropertyType Hardware revision of the device
PropertyType Name of the company that manufactured the device
PropertyType Model
PropertyType Article number
PropertyType Incremental counter that specifies how often the static data
in the device was modified.
PropertyType ID, which uniquely identifies the device for the device manu-
facturer
PropertyType Number of the slot
PropertyType Revision status of the device software
PropertyType Software Version (only SITOP BAT1600)
Definition Description
AnalogItemType Total capacity of the installed batteries in Ah.
AnalogItemType Voltage value below which a battery is considered to be
defective and should no longer be charged.
AnalogItemType Duration of the constant voltage charging phase.
PropertyType Make/type of battery 0 ... lead-gel battery (Pb), 1 ... pure
lead battery (pPb)
AnalogItemType Max. permissible current to charge the battery
AnalogItemType Typical ambient temperatures for battery modules in opera-
tion.
AnalogItemType Threshold when switching over from normal battery charg-
ing to preserve charge voltage (brief post charging).
Engineering and remote access
3.10 OPC UA server
177