Identification; Lock - Siemens SITOP UPS1600 Equipment Manual

Engineering and remote access
3.10 OPC UA server
Display name Data type
HardwareBuffering Boolean
EnableClamp
HardwareEnable Boolean
ResetClamp
HardwareStartFrom Boolean
BatteryClamp
3.10.6.13

Identification

Display name Data type
IdentificationContact String[64]
Setpoint
IdentificationDevice String[32]
NameSetpoint
IdentificationLocation String[44]
Setpoint
Note
The various S7 systems interpret parameter "IdentificationLocationSetpoint" differently.
S7-1200 and S7-1500 correctly process the data sets.
S7-300, S7-400 and ET200SP do not fully support this data. Proceed as follows to correctly
save this data to these PLCs:
• Write the data to identify the devices in the PLC code using function "WR_REC".
• Read the data to identify the devices using the "RD_REC" functions.
For the ET200SP, a description of the two functions can be found here:
(https://support.industry.siemens.com/cs/de/en/view/58649293)
• Alternatively, use the PRONETA
(https://support.industry.siemens.com/cs/ww/de/view/67460624) tool to read and write
data
3.10.6.14

Lock

Display name Data type
BreakLock Method
1)
ExitLock Method
InitLock Method
Locked Boolean
LockingClient String[16]
LockingUser String
172
Definition Description
PropertyType Enable buffering
PropertyType When input voltage returns during buffering, the output is
switched off for a configurable time in order to reset con-
nected devices.
PropertyType Setting for 'Start from battery' on signal terminal
Definition Description
PropertyType Contact
PropertyType PROFINET device name
PropertyType Location ID
Definition Description
Method
Method Lock for write access is withdrawn
Method Locks write access for other users
PropertyType Locked
PropertyType IP address of the blocking user
PropertyType User that had locked
SITOP UPS1600 / BAT1600 / UPS1100
Equipment Manual, 07.2021, A5E37775406-11-76