DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Replace
Click the Restore button to initiate the configuration restore.
Configuration Backup to HTTP
This window is used to initiate a configuration file backup to a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
Source File
Click the Backup button to initiate the configuration file backup.
Configuration Backup to TFTP
This window is used to initiate a configuration file backup to a TFTP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to TFTP, as
shown below:
The fields that can be configured are described below:
Parameter
Unit
Description
the Switch. Select the startup-config option to restore and overwrite the start-
up configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
Figure 13-8 Configuration Backup to HTTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the source filename and path of the configuration file located on the
Switch here. This field can be up to 64 characters long. Select the running-
config option to back up the running configuration file from the Switch. Select
the startup-config option to back up the start-up configuration file from the
Switch.
Figure 13-9 Configuration Backup to TFTP Window
Description
Select the Switch unit that will be used for this configuration here.
427