Ipv6 Route Table; Route Preference - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Route Table

This window is used to display and configure the IPv6 route table.
To view the following window, click L3 Features > IPv6 Route Table, as shown below:
The fields that can be configured are described below:
Parameter
IPv6 Address
IPv6 Address/Prefix Length
Interface Name
Connected
RIPng
OSPFv3
Database
Summary
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

Route Preference

This window is used to display and configure the route preference settings. Use this window to configure the distance,
which represents the route's trust rating. The route with a lower distance value is preferred over the route with a higher
distance value. A route with the distance 255 will not be installed for routing of packets since it indicates that the route
is not trusted.
To view the following window, click L3 Features > Route Preference, as shown below:
Description
Figure 6-144 IPv6 Route Table Window
Description
Select and enter the IPv6 address to display here.
Select and enter the IPv6 address and prefix length to display here. Select the
Longer Prefixes option to display IPv6 routes with prefixes greater than and
equal to the prefix length.
Select and enter the name of the interface to display here.
Select this option to display only connected routes.
Select this option to display only RIPng routes.
Select this option to display only OSPFv3 routes.
Select this option to display all the related entries in the routing database
instead of just the best route.
Select this option to display a summary and count of the route sources
configured on this Switch.
198