Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Unit
Source File
Click the Backup button to initiate the firmware backup.
Firmware Backup to TFTP
This window is used to initiate a firmware backup to a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Source File
Destination File
Click the Backup button to initiate the firmware backup.
Configuration Restore & Backup
Configuration Restore from HTTP
This window is used to initiate a configuration restore from a local PC using HTTP.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP,
as shown below:
Description
Select the Switch unit that will be used for this configuration here.
Enter the source filename and path of the firmware file located on the Switch
here. This field can be up to 64 characters long.
Figure 13-5 Firmware Backup to TFTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option
is selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the source filename and path of the firmware file located on the Switch
here. This field can be up to 64 characters long.
Enter the destination filename and path of the firmware file to be backed up to
the TFTP server here. This field can be up to 64 characters long.
425
Advertisement
Table of Contents
