Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Inner CoS
Time Range
Click the Apply button to accept the changes made.
Click the Back button to discard the changes made and return to the previous page.
ACL Interface Access Group
This window is used to display and configure the ACL interface access group settings.
To view the following window, click ACL > ACL Interface Access Group, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Direction
Action
Type
ACL Name
Click the Apply button to accept the changes made.
After clicking the Please Select button, the following window will appear:
Description
After selecting the CoS value, select the inner CoS value that will be used here.
The range is from 0 to 7.
Mask - Enter the inner CoS mask value here. The range is from 0x0 to
•
0x7.
Enter the name of the time range profile that will be used in this ACL rule here.
This name can be up to 32 characters long.
Figure 8-177 ACL Interface Access Group Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the direction here. Options to choose from are In and Out.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the ACL type here. Options to choose from are IP ACL, IPv6 ACL, MAC
ACL, and Expert ACL.
Enter the ACL name here. This name can be up to 32 characters long. Click the
Please Select button to select an existing ACL from the list.
292
Advertisement
Table of Contents
