DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Action
Click the Find button to find and display the statistics information associated with the specified port(s).
Click the Show All button to display all the statistics information.
Ethernet OAM DULD Settings
This window is used to display and configure the Ethernet OAM D-Link Unidirectional Link Detection (DULD) settings.
DULD is an extension of 802.3ah Ethernet OAM. It provides a mechanism to detect a unidirectional point-to-point
Ethernet link without PHY support. OAM vendor specific messages are used in the detection. The detection process is
started after OAM discovery was started but does not complete the negotiation in the configured discovery time.
Figure 10-225 Ethernet OAM Statistics Table Window
Description
Select the Switch unit ID that will be used here.
Select the Switch port range that will be used here.
Select the Find option to find and display the statistics information associated
with the specified port.
Select the Clear option to clear the statistics information associated with the
specified port(s).
397