Error Messages; Client Error Messages; Server Error Messages; Icmp Error Messages - Bosch CL400 Manual

9.3

Error Messages

9.3.1

Client Error Messages

9.3.2

Server Error Messages

9.3.3

ICMP Error Messages

1070 072 196-101 (00.06) GB
Error-free client commands are finished by:
D Command finished
Faulty commands are finished by:
D Command aborted Errorcode: 3363; Buffer overflow, amount of data too
large
D Rx IP-Rs BUEP-Error: Err1: 10, Err2: 00
Err1 corresponds to the error code in the error table.
Err1: 10 Err2: 0 = PST block address wrong
Error-free server commands display the received command only.
Errors that appear during the execution of the received command are output
with the message:
D BUEP: Err1: 10, Err2: 00
This error message is also sent to the client.
Err1 corresponds to the error code in the error table.
Err1: 10 Err2: 0 = PST block address wrong
The ICMP signals (Internet Control Message Protocol) are generated by
ICMP messages on the Ethernet.
Messages that are directly processed on the module:
D ECHO REPLY
D ECHO REQUEST
D REDIREKT
The other messages are indicated in the error output.
Errors that usually lead to a job abortion:
D DESTINATION UNREACHABLE
D TIME EXCEEDED
D PARAMETER PROBLEM
Ethernet Job Listing 9- -7