Table of Contents
Advertisement
2- -20
Hardware
2.7
Status Display
Each channel of the COM-E module is provided with a status display. It
shows all channel-related statuses and error messages.
These messages are assigned directly to the corresponding channel, and
thus to this protocol.
Lower
Upper
Explanation
Display
Display
0 to 3
H
Hardware error
4
H
No Ethernet address
5
H
Reserved
0 to F
*
Faulty jobs channel 1 (Ethernet)
*
0 to F
Faulty jobs channel 0 (V.24/20 mA)
*
P
No protocol set for channel 0 (monitoring is possible)
*
'-'
Job listing (monitoring/tracer) on
*
'_'
Error listing on
*
'-.'
Data output with job listing
*
'_.'
Data output with error listing
U
*
No IP address set
n
*
No configuration file loaded
*
.
Centralized job runs at channel 0
.
*
Centralized job runs at channel 1
*
C
Software error
C
A
Wait for system logon, wrong block address, no entry of
the module in the SK table
*
C
Reserved
0 to F
off
Hangman, with output of a 3-digit string
1070 072 196-101 (00.06) GB
Hide quick links:
Advertisement
Table of Contents
