Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual page 70

68/83 Bosch Rexroth AG
Maintenance and Installation
2. Wait until the power supply unit switches off automatically and then, switch
off the supply voltage. If required, unplug all connectors from the VSB
40.1.
3. Put the VSB 40.1 on a solid mat, so that the connector panel looks in your
direction.
4. Loosen and remove the two fastening screws of the cover:
Fig.8-15: Loosen the fastening screws of the cover
5. Lift up the cover with the fan.
Fig.8-16: Lift the cover with the fan
6. Loosen the fastening screw of the corresponding extension card and re‐
move it:
DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC