Maintenance And Installation; General Information; Cmos Battery; Connecting The Uninterruptible Power Supply (Ups) - Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual

DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC
8

Maintenance and Installation

8.1

General Information

Maintenance
8.2

CMOS Battery

8.3

Connecting the Uninterruptible Power Supply (UPS)

8.3.1 General Information
VSB control cabinet PCs are maintenance-free. However, some components
are subject to wear and must be replaced, see
page 25.
Include the following measures in the maintenance schedule:
● At least once a year, check all plug and terminal connections of the com‐
ponents regarding proper tightness and possible damage. Check that
cables are not broken or squeezed. Replace damaged parts immediately.
● The fan must be checked at least once a year.
DANGER
The fan impeller must not be touched by persons or come in contact with other
objects.
● Ensure that the VSB 40.1 is connected to a working uninterruptible power
supply unit.
As accessories Bosch Rexroth offers uninterruptibe power supplies
(UPS) for the 230 V supply as well as for the 24 V supply, see
chapter 11.2 "Accessories" on page
The battery used for buffering the RAM, BIOS and the clock has a limited serv‐
ice life, see chapter 4.8 "Wear Parts" on page
This lithium battery must not be changed by the user. The battery may only be
exchanged by the Bosch Rexroth Service (see
port" on page 79) or by personnel trained and authorized by the Service.
WARNING
Do not load, remove, destroy, burn or heat batteries over 100 °C. Dispose old
batteries immediately and properly. Keep away from children!
As accessories Bosch Rexroth offers uninterruptibe power supplies (UPS) for
the 230 V supply as well as for the 24 V supply, see
ries" on page 77.
These USP devices bridge short voltage dips. Longer voltage dips cause and
allow a normal shutdown of the operating system. Therefore, Bosch Rexroth
recommends to use an UPS.
The uninterruptible power system is connected to the voltage supply line. De‐
pending on the UPS type, the UPS communicates via the XUSB interface or
the XCOM interface with the VSB 40.1.
Bosch Rexroth AG
Maintenance and Installation
chapter 4.8 "Wear Parts" on
Risk of injury by rotating fan impeller!
77.
25.
chapter 12 "Service and Sup‐
Batteries can cause fire, explosions or chemi‐
cal burn.
chapter 11.2 "Accesso‐
59/83