Mounting The Vsb 40.1 Variant Nn; Horizontal Mounting With Connector Panel In Forward Direction - Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual

28/83 Bosch Rexroth AG
Dimensions and Installation Notes
Mounting direction
Minimum distances
5.2

Mounting the VSB 40.1 Variant NN

5.2.1

Horizontal Mounting with Connector Panel in Forward Direction

Fig.5-2: VSB 40.1, variant LS (drive in connector direction)
Any horizontal and vertical mounting direction is permissible. However, Bosch
Rexroth recommends the mounting directions illustrated below.
Do observe the distance required for all installation positions of connectors and
cables as well as for the opening drive. A distance of at least 50 mm is required
on all sides in order to guarantee a sufficient cooling of the VSB 40.1.
Fig.5-3: Connector panel in forward direction, optional drive on the top
DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC