Exchanging The Hard Disk Of The Vsb 40.1, Ls Variant - Bosch Rexroth IndraControl VSB 40.1 Project Planning Manual

64/83 Bosch Rexroth AG
Maintenance and Installation
8.4.3

Exchanging the Hard Disk of the VSB 40.1, LS Variant

1. Store all required user data as well as the operating system settings of the
system either on an external storage medium or via the network connec‐
tion!
2. Shut down the operating system.
3. Wait until the power supply unit switches off and then, switch off the supply
voltage. If required, unplug all connectors.
4. Put the VSB 40.1 on a solid mat so that the connector panel looks in your
direction.
5. Loosen the four screws with which the mounting frame is fixed at the VSB
40.1:
Fig.8-8: Loosen the fastening screws at the mounting frame
6. Remove the VSB 40.1 carefully from the mounting plate (mounting frame)
because the hard disk drive is fastened in the mounting frame.
Fig.8-9: Remove the VSB 40.1 from the mounting plate
7. Tip the VSB 40.1 to the left side.
DOK-SUPPL*-VSB*40.1***-PR03-EN-P
Rexroth IndraControl VSB 40.1 Control Cabinet PC