Checking The Status Of The Phone System; Configuring Ipsec - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation
Phone system information is available on the Base Unit and Phone System pages of Administrator.
On the Base Unit page, you can view the status of the connection; the availability of storage space, particularly for
voicemail storage; and the log of events that occurred on the base unit, including errors, warnings, and information.
To view the status of the phone system:
1. Click the Base Unit button.
2. Review information under the Status of Base Unit, Storage Space Use, and Properties sections.
3. Click available options in these sections, or in the Tasks panel, for more information about the base unit
settings.
If your office LAN is configured to use Internet Protocol security (IPSec), we recommend that you:
1. Configure the Dynamic Host Configuration Protocol (DHCP) server for the LAN to always assign the same IP
address to the base unit.
2. Configure the IPSec policy on the LAN to allow unsecure inbound and outbound communication with the IP
address of the base unit.
D-Link DVX-000MS User Manual

Checking the Status of the Phone System

Configuring IPSEC