Connecting The Dvg-3104Ms Gateway - D-Link VoiceCenter DVX-2000MS User Manual

Section  - Installation

Connecting the DVG-3104MS Gateway

The DVG-3104MS Gateway translates incoming phone calls so they can be sent over your organizations's LAN, and
translates outgoing calls into the format used by traditional phone service.
Note: Avoid disabling your existing phone service while setting up the VoiceCenter. If you have an alternative jack
available, use it to set up and test the VoiceCenter phone system.
Plug the power adapter into an AC outlet or power strip and plug the other end into the AC input on the back of the
gateway. The power LED will light up to indicate proper connection.
Connect one end of the Ethernet cable to the LAN Port on the back of the gateway and connect the other end of
the Ethernet cable to your Local Area Network using a switch or hub. The LAN LED will light up to indicate proper
connection.
Connect the phone cable to an available PSTN (FXO) Port on the back of the gateway and connect the other end to
a phone jack.
When you have made all the connections to your network, it should look like the diagram below:
D-Link DVX-000MS User Manual 0