(Continued)
Code
Error message
96
NV-RAM TROUBLE
sub error message
menu-1
menu-2
menu-3
id code
SWC-1
SWC-2
SWC-3
SWC-4
97
SV NV-RAM TROUBLE
98
NV-RAM TROUBLE
sub error message
RF ADJUST DATA LOST
Description
The operational defect of the NV-RAM
(setup menu data) on the SWC-19 board or
SS-52 board is detected.
Then, reset the data in the NV-RAM to the
condition at exfactory for menu-1, 2, 3, and
id code.
menu-1 :
IC13 of SS-52 board
menu-2 :
IC13 of SS-52 board
menu-3 :
IC13 of SS-52 board
id code :
IC3, 4, 5 of SWC-19 board
SWC-1 :
IC3 of SWC-19 board
SWC-2 :
IC4 of SWC-19 board
SWC-3 :
IC5 of SWC-19 board
SWC-4 :
IC6 of SWC-19 board
The operational defect of the NV-RAM
(servo adjustment data) on the DR-200
board is detected.
The operational defect of the NV-RAM
(IC6) (RF adjustment data ) on the SWC-19
board is detected.
Then, reset the data in the NV-RAM to the
condition at exfactory.
3-1. Error Message
Detection
Detected by the NV-RAM data's
checksum.
Detected when the ID codes of three NV-
RAMs are not equal.
Detected when no interface signal is sent
from the each NV-RAM to IC2 on the
SWC-19 board.
Detected by the NV-RAM data's
checksum.
Detected by the NV-RAM data's
checksum.
3-3