6-1. General Information for Boards Replacement
6-1-2. Plug-in Board Pulling Out/ Inserting
Always switch off the power before removing or installing
the plug-in board.
Pulling out
1. Loosen a screw, and remove the board retainer (L) or
(S).
Board
retainer (L)
Screws
(with stopper)
6-2
2. Pull up the eject levers on the board in the direction of
Board
retainer (S)
3. Disconnect the connected harness.
the arrows when pulling out the board from the
connector.
n
Do not try to pull the board by grasping any of the
components on the board.
Pull out the board with equal force for both sides.
Eject levers