Panasonic MICRO-IMAGECHECKER AX40 User Manual page 238

Gray Edge- Reading Edge Threshold ([%H])
Position Adjustment (Gray Edge), Rotation Adjustment (Gray Scale Edge Horizontal/ Vertical)
Communication Command / Description
direction
Sending
Command from
External Device
?? : 01 - 99 (To specify the target checker number)
Response - At Serial setting - Command Digit: "Valid"
normal operation
(Command Digit:
"Valid")
?? : 01 - 99 (Checker No.)
aaa : 001 - 255 (Edge Thresholds of Horizontal
bbb : 001 - 255 (Edge Thresholds of Vertical
Serial setting - Command Digit: Fixed (4 Digit)
?? : 01 - 99(Checker No.)
aaaa : 0001 - 0255 or 1 - 0255
bbbb : 0001 - 0255 or 1 - 0255
nnnn :
nnnn :
Response- Error 1
Cause
•
•
Response- Error 2
ERROR signal is
output from the
Cause
parallel output port.
•
•
*1 If only Horizontal or Vertical has been set, response for the unset edge threshold will be "0".
Example: If Horizontal-edge threshold = 100 and Vertical = unset (Checker No.)
% H 0 1 ,
230
% H ? ? CR
% H ? ? , a a
% H ? ? a a a
*1
(Edge Threshold
(Edge Thresholds
0001 - 0255: If invalid = 0
0001 - 0255: If invalid = space
% U CR
Command in the unspecified form or not provided was received.
Examples:
C
- %H1 (any other checker number than 01 - 99 was specified.)
R
C
- %J01 (not provided command)
R
% Z CR
The checker type already created to the specified number is not the target checker of
this command
No checker is created to the specified number.
1 0 0 , 0 0 0 CR
a , b b b CR
*1
or Base Checker 1)
*1
or Base Checker 2)
a b b b b CR
of Horizontal or Base Checker 1)
*1
of Vertical or Base Checker 2)