Analog Rgb Output Cabling - Mitsubishi Electric MELSEC Q Series User Manual

8.7.3

Analog RGB output cabling

Described in this section are the specifications and wiring of compatible RGB cables.
(1) Analog RGB output connector
The analog RGB output connector is located at the bottom face of the module.
Analog RGB output connector
*1 : Connect the display before powering ON.
(a) Q24DHCCPU-VG
• Connection with a general-purpose analog RGB display
For the connectable cables and peripheral devices, the ones meet the specifications of analog RGB
connector for C Controller module can be used.
 Page 45, Section 3.2
(b) Q24DHCCPU-LS and Q26DHCCPU-LS
For the connectable cables and peripheral devices, refer to the manual of the partner operating system, or
consult the partner (operating system vendor).
Q24DHC-V
Q24DHC-VG
Connection destination
*1
General-purpose RGB display
CHAPTER 8 INSTALLATION AND WIRING
Q24DHC-LS Q26DHC-LS
Q12DC-V
8
131