Mitsubishi Electric MELSEC Q Series User Manual page 117

(3) Connection with a general-purpose analog RGB display
Use the analog RGB output connector for connection.
For specifications and wiring of analog RGB output connector, refer to the following.
Page 131, Section 8.7.3
(a) Precautions for connection with a general-purpose analog RGB display
• Power management function
C Controller module does not support the VESA DPMS-compliant power management function.
(4) Connection via the RS-232 connector
Use the RS-232 connector at the bottom of the C Controller module.
For wiring of the RS-232 cable, refer to the following.
Page 132, Section 8.7.4
(5) Connection via network modules
For connection via network modules, refer to the manual for respective network modules.
Note7.1
Q24DHCCPU-V Q12DCCPU-V
Q24DHCCPU-V and Q12DCCPU-V cannot be connected.
CHAPTER 7 SYSTEM CONFIGURATION
For "-LS", consult with the
partner (operating system vendor).
For "-LS", consult with the
partner (operating system vendor).
Note7.1
For "-LS", consult with the
partner (operating system vendor).
115
7