Mitsubishi Electric MELSEC Q Series User Manual page 120

(2) Removal from base unit
Support the module with both
hands and securely press the
module fixing hook
your finger.
Pull the module straight toward
you supporting it at its bottom
while pressing the module
fixing hook
While lifting the module, take off
the module fixing projection
from the module fixing hole.
*1 : Push the two modules fixing hooks on the right and left of the module top simultaneously with your fingers until they stop.
*2 : Remove the two module fixing projections on the right and left of the module bottom from the module fixing holes.
When removing the module which is secured by module fixing screw, remove the module fixing screw first and then module
fixing projection off the module fixing hole of the base unit.
Failure to do so may damage the module fixing projection.
118
*1 with
*1 .
*2
Completed
Push simultaneously
Module fixing hook
Push
Module fixing
hook *1
Module connector
Base unit
Module fixing hole
Lifting
Module