CIP5000 series storage
5.
12.6.2
Restart Email service
To restart the Email service:
1.
2.
3.
4.
5.
12.6.3
Email settings
To change Email service settings:
1.
2.
3.
4.
5.
6.
Under Service Setting -- Email choose a startup type:
–
–
Under Email Server Settings
–
–
–
–
12.6.4
Send test Email message
After configuring your email settings, you can send a test email.
To send a test email message, complete email settings as described above and check the
Send a test email option box, then click the Submit button. A test email message is sent to the
address you specified.
Bosch Security Systems B.V.
Click the Confirm button.
Click the Administrative Tools icon.
Click the Software Management icon.
Click on Email in the Service List of the Service Management menu.
Click the Restart button under Service Status -- Email.
Click the Confirm button.
Click the Administrative Tools icon.
Click the Software Management icon.
Click on Email in the Service List of the Service Management menu.
Make settings changes as required.
Click the Submit button.
Click the Confirm button.
Automatic - (default) Starts and runs with the subsystem.
Manual - You start the service when you need it.
SMTP Server IP address
SMTP Authentication under Email Server Settings
–
The Yes option enables authentication.
–
The No option disables.
SMTP Authentication under Email Server Settings
–
Username - Required if SMTP authentication is enabled.
–
SMTP Authentication Password - Required if SMTP authentication is enabled.
Under Email Content Customization
–
Email Sender (From) Address - The sender's name shown on notification messages.
–
Email Subject - The subject line of the notification message.
User manual
User management | en
45
2019-10 | V01 | F.01U.380.030