Bosch CIP5000 Series User Manual page 19

CIP5000 series storage
Caution!
Do not install the enclosure hardware into a rack without rails to support the system.
!
Caution!
Only a qualified technician who is familiar with the installation procedure should mount and
!
install the enclosure hardware.
Caution!
Mount the rails to the rack using the appropriate screws and flange nuts, fully tightened, at
!
each end of the rail.
Caution!
Do not load the rails unless they are installed with screws as instructed.
!
Caution!
The rails available for the CIP enclosure hardware are designed to safely support that CIP
!
enclosure hardware when properly installed. Additional loading on the rails is at the
customer's risk.
Caution!
Bosch cannot guarantee that the mounting rails will support your CIP enclosure hardware
!
unless you install them as instructed.
Install the enclosure to the rack using the optional rails.
Notice!
To lighten the enclosure, you can remove the power supplies. Replace the power supplies
after the unit is mounted on the rack.
Notice!
For more information on rack mounting, refer to the Quick Installation Guide for rail
assembly.
Bosch Security Systems B.V. User manual
Hardware configuration | en
2019-10 | V01 | F.01U.380.030
19