Software Management; Import A Configuration Script; Export A Configuration Script; Save A Service Report - Bosch CIP5000 Series User Manual

CIP5000 series storage
12.5

Software management

The Software Management menu is used to manage email settings, SNMP settings, and
network services.
The email function is used to send event notifications. The network service is used to establish
a remote network connection to the Management GUI. In addition, you can use this feature to
export and import configuration script files and user database files.
12.5.1

Import a configuration script

You can import a previously saved configuration script and import the script to automatically
configure your CIP5000 subsystem.
The script must be a plain, non-encrypted text file. This file can be saved from the same
system or from another CIP5000 subsystem.
Caution!
Do not attempt to write or modify the configuration script until you are instructed to do so by
!
technical support personnel.
Importing a configuration script overwrites the current settings on your CIP5000 subsystem.
To import a configuration script for automatic configuration of a subsystem:
1.
2.
3.
4.
5.
6.
7.
The configuration script is automatically loaded and applied.
12.5.2

Export a configuration script

You can save the configuration from one subsystem, export it, and then import it to
automatically configure your other CIP5000 subsystems.
To export a configuration script:
1.
2.
3.
4.
5.
6.
The file is saved to your PC as "Configscript.txt".
12.5.3

Save a service report

A service report is a detailed report that contains the configuration and status of all
components in your RAID system. A support technician or field engineer may request a service
report for diagnosis and troubleshooting.
To save a system configuration file:
1.
2.
Bosch Security Systems B.V.
Click the Administrative Tools icon.
Click the Software Management icon.
Click the Import tab on the Software Management menu.
From the Type drop-down menu, select Configuration Script.
Click the Import button.
Click Browse and locate the file "Configscript.txt" on the host PC.
Click the Submit button.
Click the Administrative Tools icon.
Click the Service Management icon.
Click the Export tab in the Service Management menu.
From the Type drop-down menu, select Configuration Script.
Click the Export button.
Select a location on the Host PC for the downloaded file and save the file.
Click the Subsystem icon (IP address and device name) in Tree View to open the
Subsystem Information display.
Click the Save button in the Save System Service Report row of the information display.
– Information for the report is gathered and compiled. This process takes a few
minutes, depending on the size of your RAID system.
User manual
User management | en 43
2019-10 | V01 | F.01U.380.030