Siemens Sinumerik 840D Operating Turning page 633

Hide thumbs Also See for Sinumerik 840D:

1 Brief description

Objective of the module:

Working through this module you become familiar with the technology "Straight Circle" in ShopTurn

by programming two programs with ShopTurn functionality.

Description of the module:

This module explains exemplary the programming of a "Straight Circle" -machining (planar cut) and

the programming of a more complex workpiece (shaft).

840D/828D SINUMERIK Operate

Straight Circle

This document was produced for training purposes.

Siemens assumes no responsibility for its contents.

Sinumerik 828d