Siemens Sinumerik 840D Operating Turning page 450

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

The following program line will be inserted into the

N320 CYCLE952("FINISHING",,"",2301321,

0.12,0,0,1.9,0.1,0.1,0.2,0.2,0.1,0,3,0,0,,,,,2,2,,,0,1,,0,

Program the following two lines:

N330 G0 X200 Z200

Program now the contour and insert the first contour

description (SPIGOT_BLANK) into the program.

Press the VSK 1 "Contour".

The vertical softkey bar with functions for creating

and calling up a contour opens.

Press the VSK 1 "New contour" to create a new con-

The input mask for entering a name for the new con-

Enter the following name for the new contour:

Confirm your input by pressing the VSK 8 "Accept".

The following screen opens, where you can set the

starting point of the contour.

840D/828D SINUMERIK Operate

Sinumerik 828d