Siemens Sinumerik 840D Operating Turning page 534

Section 5
Notes
B601
B601
Various
Parameter Meaning
Rear:
Work offset
Work offset in which
Basic ref.
the coordinate sys-
G54
tem, which was
shifted according to
G55
ZW and by ZV as well
G56
as mirrored in Z, must
be saved.
G57
ZnW Machining position for
special axis (abs);
MCS
ZV Offset Z=0
5.4.4 Parameters for counterspindle "Grip"
Parameter Meaning
Grip:
Coordinate system
The park position is entered into the machine coordi-
Machine
nate system.
(MCS)
Teaching of the park position and the angular offset
is possible.
The park position is entered into the workpiece coor-
Workpiece
dinate system.
(WCS)
XP (mm) Parking position of
the tool in X-direction
ZP (mm) Parking position of
the tool in Z-direction
Flush chuck
Flush the counter-
Yes
spindle chuck
Do not flush the
No
counterspindle chuck
Page 26
Help picture/animation
(continuation)
Help picture/animation
(see section 5.4.2)
(see section 5.4.2)
(see section 5.4.2)
(see section 5.4.2)
840D/828D SINUMERIK Operate