Siemens Sinumerik 840D Operating Turning page 521

Edit
4.3 Search
With the function search you can search for any text in a sequential pro-
gram and even replace the text with other text.
4.3.1 Selecting the function "Search"
By pressing the VSK1.3 "Search" the search window
opens like displayed below. The following functions
are available in the vertical softkey bar:
4.3.2 Vertikal softkey bar
Display area Description
By pressing the VSK 1 "Go to start" the cursor will be
positioned on the first line of the program.
By pressing the VSK 2 "Go to end" the cursor will be
positioned on the last line of the program.
By pressing the VSK4 "Serach" the seach mask
opens, where you can decide to search for complete
words, select the search dirction (foreward/
backwards) and enter the search text.
By pressing the VSK5 "Find + replace" the "Search
and replace" mask opens where you can decide to
search for complete words, select the search direc-
tion (foreward/backwards), enter the search text and
enter the text you want to use for the replacement.
With pressing the VSK 7 "Cancel" you can abort the
search process.
By pressing the VSK 8 "OK" you start a search run
with the above mentioned search criteria.
840D/828D SINUMERIK Operate
Section 4
Notes