Siemens Sinumerik 840D Operating Turning page 575

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Confirm your inputs by pressing the VSK 8 "Accept"

The following program block "Program header" will

be inserted into the work plan:

Start the program by programming a center drilling

Press the HSK 1.2 "Drill.".

Press the VSK 1 "Centering".

The parameter mask for the "Centering" opens.

Insert the values like displayed below:

To insert a tool into the parameter window, press the

VSK 1 "Select tool".

Mark the desired tool (CENTERDRILL_D12) in the

tool list with the orange selection cursor and press

the VSK 1 "To program".

The following program block "Centering" will be in-

serted into the work plan:

The program chain starts.

Note the downward opened bracket on the right side

of the programming symbol.

Now, program the drill cycle.

Press the VSK 2 "Drilling Reaming".

Select the VSK 3 "Drilling" to open the input mask for

the drilling cycle.

Fill out the input mask like displayed below:

840D/828D SINUMERIK Operate

Sinumerik 828d