Siemens Sinumerik 840D Operating Turning page 488

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Insert the following values into the parameter mask:

Confirm your inputs by pressing the VSK 8 "OK".

The following lines are inserted into the program:

_MVAR=100 _SETVAL=0.5 _MA=1 _FA=10

_TSA=1 _KNUM=0 _PRNUM=1 _VMS=0 _NMSP=1

Program now the following G code lines:

N150 G0 X110

Program now the CYCLE994 to measure the edges

of the workpiece.

Press the VSK 4 "Workpiece measure".

The vertical softkey bar with different functions for

measuring workpieces opens.

Press the VSK 3 "Two-point measurem.".

The input window for the technology "Two-pt.meas./

CYCLE994" opens.

840D/828D SINUMERIK Operate

Sinumerik 828d