Siemens Sinumerik 840D Operating Turning page 414

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

3.1 Example: Drill pattern

The following program, with the call up of a drilling-, center drilling- and

thread drilling-cycle, is to be programmed:

Create a new G code programGUIDE-program in ShopTurn, like described

in section 2.1 in this module.

Give the program a name, for example "DIN_DRILLING_2".

Program the first G code line of the program:

N10 G54 G17 G90

Program the following G code commands:

N20 TRANSMIT

N30 SETMS(2)

Now insert a blank for the simulation.

For this, press the HSK 1.6 "Various" to open the

operating area "Various".

Press the VSK 1 "Blank" to open the parameter

mask for the blank.

Insert the values into the parameter mask like dis-

played below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N40 WORKPIECE(,,"","CYLINDER",192,0,-100,

840D/828D SINUMERIK Operate

Sinumerik 828d