Siemens Sinumerik 840D Operating Turning page 182

Hide thumbs Also See for Sinumerik 840D:

Basic operations

2.2.1 Horizontal softkey bar (HSK)

Display area

By pressing HSK 1 "Machine" the operating are

"Machine" will be called up.

See module B519 - "Operating area machine".

By pressing the HSK 2 "Parameter" the operating

area "Parameter" will be called up.

See module B523 - "Operating area Parameter".

By pressing the HSK 3 "Program" the operating

area "Programm" will be called up.

See module B524 - "Operating area Programm".

By pressing the HSK 4 "Program-Manager" the op-

erating area "Program-Manager" will be called up.

See module B525 - "Operating area Program-

By pressing the HSK 5 "Diagnose" the operating

area "Diagnose" will be called up.

See module B526 - "Operating area Diagnose".

By pressing the HSK 6 "Start-up" the operating area

"Start-up" will be called up.

See module B527 - "Operating area Start-up".

2.2.2 Vertikale Softkey-Leiste (VSK)

Display area

By pressing the VSK 1 "AUTO" the operating mode

"AUTO" will be called up.

See module B522 - "Operating mode AUTO".

By pressing the VSK 2 "MDA" the operating mode

"MDA" will be called up.

See module 521 - "Operating mode MDA".

By pressing the VSK 3 the operating mode "JOG"

will be called up.

See module B520 - "Operating mode JOG".

840D/828D SINUMERIK Operate

Sinumerik 828d