Inserting A Drive; Inserting A Drive Offline - Siemens Sinamics S120 Comissioning Manual

Commissioning
4.3 Creating a project
4.3.3

Inserting a drive

4.3.3.1

Inserting a drive offline

Requirement
You have created a project (Page 55) or have opened an existing project.
Inserting the drive via the Portal view
Insert new devices (drives) either in the Portal or the project view.
Proceed as follows to insert devices in the Portal view:
1. In the navigation, click on "Devices & networks".
2. Click "Add new device" in the secondary navigation.
The data for the new device to be added is displayed in the detailed view to the right.
3. Click on "Drives" to display the drives available.
60
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive