Status Parameters; Diagnostics Information For Drive Axes; Calling The Screen Form; Missing Enables - Siemens Sinamics S120 Comissioning Manual

Diagnostics
5.3 Diagnostics via Startdrive
5.3.4.4

Status parameters

The status parameters with the associated numeric values are displayed in the function view
in the "Status parameters" mask:
Column
Number
Parameter text
Value
Unit
5.3.5

Diagnostics information for drive axes

5.3.5.1

Calling the screen form

You can call up the screen form to display diagnostics information for a drive axis as follows:
1. In the project navigation, select menu "Drive axis_x > Parameter".
The corresponding detailed view is displayed at the right.
2. In the secondary navigation, call menu "Diagnostics > xxx" (xxx stands for the name of
the particular detailed screen form)
The detailed view is updated.
5.3.5.2

Missing enables

Definition
The drive axis only changes to the "Operation" state if all of the enable signals are available.
In the "Missing enables" mask, the LEDs in the function view indicate which enables are still
missing. A red LED indicates that the appropriate enable signals are missing.
The bits of the missing enables (r0046) are displayed in the mask.
Figure 5-10
172
Meaning of the instruction
Number of the parameter.
Entire parameter text in long form.
Numeric value of the parameter.
Unit of the parameter.
Missing enable signals for a drive axis
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive