Shortcut Menus And Icons In Startdrive; Function Calls Project View; Project Navigation - Siemens Sinamics S120 Comissioning Manual

Appendix
A.3 Shortcut menus and icons in Startdrive
A.3

Shortcut menus and icons in Startdrive

A.3.1

Function calls project view

A.3.1.1

Project navigation

Shortcut menu
The shortcut menu of a drive in the project navigator contains the following entries:
Menu item
Open
Parameters
Cut
Copy
Paste
Delete
Rename
Go to topology
view
Go to network
view
Download to
device
Upload from
device (software)
Compile
Go online
Go offline
Online & diag-
nostics
Browsing a pro-
ject
Properties
198
Icon (button) in the Description
toolbar
- Opens the drive device view.
- Opens the parameter view in the working area.
Cuts the selected content and copies it to the clipboard.
Copies the content to the clipboard.
Inserts the clipboard content into the project navigation.
- Deletes the selected content from the project naviga-
tion.
- Permits a designation to be changed.
- Opens the topology view for drives that are networked
via PROFINET.
- Opens the network view.
Loads the data from the project into the drive (only
when online).
Loads the data from the device into the project (only
when online).
- Compiles existing programs.
Establishes an online connection to the drive.
Disconnects the online connection - the drive goes
offline.
- Opens the Online & diagnostics editor; if the drive is not
online, Startdrive tries to establish an online connection.
Opens a search screen form You can browse for indi-
vidual information about the active project using this
screen form.
- Opens the Properties dialog box of the drive. There, for
example you set bus parameters.
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive