Siemens SINUMERIK 840D sl Commissioning Manual page 79

Cycle alarm texts
Area of freely-assignable texts e.g. for cycle alarms
Table 4-3
Alarm number
065100
065101
065202
The alarm number, display and help ID are as described in the previous example.
Text or alarm number
The structure of the alarm text/number is the same as that described in the previous
example, apart from the parameter assignment:
Parameter "%1": Channel number
Parameter "%2": Block number
Indexed alarm texts
Indexed alarms can be used to display additional comments in the alarm line, e.g., an
explanation for "action =%"
Table 4-4
Alarm number
010203
016903
016912
References: Diagnostics Manual
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Example, cycle alarms
Display Help ID
1 0
1 0
0 0
Example indexed alarms
Display Help ID
0 0
1 0
0 0
Creating user-specific alarm texts
Text or alarm number
"No D number %1 is programmed"
600100
"Axis %2 in channel %1 is still moving"
Text
"Channel %1 NC Start without reference point
(Action=%2<ALNX>)"
"Channel %1 Action=%2<ALNX> not permitted in current
status"
"Channel %1 Action=%2<ALNX> only possible in reset
state"
4.3 Syntax of the text file
79