Setting Up The Drive Connection Via "Logdrive.ini - Siemens SINUMERIK 840D sl Commissioning Manual

Configuring the HMI system
2.3 Setting-up network connections
2.3.5

Setting up the drive connection via "logdrive.ini"

You can also use the "logdrive.ini" file to set up all drives (e.g. NW Linux, USB interface) that
do not require a password.
The settings in the display machine data are ignored.
Note
A Windows drive (prefix: smb) cannot be changed or set up in the "logdrive.ini" file, because
an encrypted password is required. It is not possible to enter encrypted data in the file.
Structure of the "logdrive.ini" file
You define all logical drives in section [CONNECTIONS].
ConnectionNum: Number of logical drives
Settings for each logical drive (replace "X" with the relevant drive letter).
ConnectionX
SK_ConnectionX
UsernameX
PasswordX
SoftkeyIndexX
SoftkeyTextContextX:
SoftkeyTextFileX
SoftkeyPictureX
AccessProgramX
AccessMachineX
AccessServicesX
22
Drive path, e.g., C:/Temp.
Softkey text
• Text ID (only for language-specific softkey texts)
• Text
User name (for network drives)
Password belonging to UsernameX
Softkey position on the horizontal softkey bar. Index 1-8 is
the first ETC level, 9-16 second level, etc.
Text context for the text ID (only for language-specific
softkey texts)
Text file that contains the softkey text identified by the text
ID (cf. SK_ConnectionX) (only for language-specific
softkey texts)
File name of the icon
Access level for the program area
Access level for the Machine area
Access level for the Services area
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
Commissioning HMI-Embedded (IM2)