Diagnostics/Service
8.1
Software version display
The version data of the installed system software are output in a version display.
Proceed as follows
1. Select the "Diagnosis" operating area.
2. Press the softkeys "Service Displays" → "Version".
3. You can display the version data of the following areas via the horizontal softkeys:
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0
– Version data of the NCU
– Version data of the HMI
– Version data of the cycles (user, manufacturer, standard cycles)
– Definitions
– Compile cycles
8
105