Configuring the HMI system
2.6 Installing/selecting language
Note
Changes can only be made to the PLC operands with the appropriate password.
The set values are retained when the control is rebooted.
2.6
Installing/selecting language
The HMI-Embedded software is available in 6 languages as standard.
Selecting the user interface language
1. The selection of the first and second language, set in the operating area "Commissioning"
via the softkeys "HMI" -> "Language selection."
2. Select the first and second languages from the "Language Selection" menu. The following
languages are available:
Changing the language
During operation, the switchover between the set languages is performed via the "Change
Language" softkey in the "Commissioning" operating area.
Setting the boot language
The language displayed when the control boots is set via the
MD9003 $MM_FIRST_LANGUAGE display machine data
30
– Simplified Chinese
– German
– English
– Spanish
– French
– Italian
Commissioning HMI-Embedded (IM2)
Commissioning Manual, 01/2008, 6FC5397-8CP10-1BA0