Add/Delete User Codes; Add/Delete Radio User Codes - Bosch AMAX panel 2000 Installation Manual

44 en | System Functions
To set the date and time for the 25th of December 2010 at 10:30PM, enter:
[1234] [955][#] break until time is shown [1 0 1 2 2 5 2 2 3 0][#]
6.16

Add/delete User Codes

This function allows Installer Code holder to change or delete a User Code.
1.
2.
3.
4.
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if you
press [#] . One long beep indicates that the code already exists or that an incorrect number
has been entered
Example
To program User Code number 2 as 4627, enter:[1 2 3 4 ] [958] [#][2][#][4 6 2 7][#]
To delete a User Code:
1.
2.
3.
4.
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if you
press [#] . One long beep indicates that the code already exists or that an incorrect number
has been entered
6.17

Add/delete Radio User Codes

This function allows Installer Code holder to add or delete a Remote Radio User Code(if
enabeled in location 182)
To add or change a Remote Radio User Code:
1.
2.
3.
4.
NOTICE!
This function is terminated automatically if you do not press a button within 240 sec or if
youpress [#] . One long beep indicates that the code already exists or that an incorrect
number has been entered.
F.01U.241.127 | V4 | 2011.12
Enter your Installer Code +956 and press [#] .
Two beeps sound and the STAY and AWAY indicators flash.
Enter the number of the code (1 - 8) you want to change and press [#] .
Two beeps sound and the corresponding zone indicator lights.
Enter the new code and press [#].
Two beeps sound and the STAY and AWAY indicators are extinguished.
Repeat this procedure to change other User Codes.
Enter your Installer Code + 956 and press [#] . Two beeps sound and the STAY and AWAY
indicators flash.
Enter the number of the code (1 - 8) you want to change and press [#] . Two beeps sound
and the corresponding zone indicator lights.
Press [*] to delete the User Code. Two beeps sound and the STAY and AWAY indicators
are extinguished.
Repeat this procedure to delete other User Code.
Enter your Installer Code +956 and press [#] . Two beeps sound and the STAY and AWAY
indicators flash.
Enter the number of the code (9 - 16) you want to change and press [#] . Two beeps
sound and the corresponding zone indicator lights.
Press any of the (transmit) buttons on the hand held key-fob. Two beeps sound and the
STAY and AWAY indicators are extinguished.
Repeat this procedure to change other Remote Radio User Codes.
Installation Manual
AMAX panel 2000 / AMAX panel 2000 EN
Bosch Sicherheitssysteme GmbH