Sony Vision Exchange PEQ-C100 System Integration & Services Manual page 68
Collaboration system
Hide thumbs
Also See for Vision Exchange PEQ-C100:
- Help manual (86 pages) ,
- System integration & services manual (77 pages) ,
- Instructions before use (2 pages)
Table of Contents
Advertisement
Also, a second HDMI display can be connected when a DisplayPort-to-HDMI adapter is
connected to the DISPLAY PORT connector.
Notes
Daisy chain connections using the DisplayPort Multi Stream Transport (MST) function are
not supported.
The cursor may not be displayed correctly if a touch panel and mouse are used together.
Except for maintenance, do not use a touch panel and mouse at the same time.
Assigning the main display and second display
1.
Connect two displays to the main unit.
2.
Turn on the devices.
3.
Open the [Display] page of the [Setting] screen.
4.
Select [Extend these displays] or [Clone these displays] in [Multiple Displays].
5.
Select the primary display in [Display], and set the following items.
[Resolution]
Select the resolution of the selected display.
[Location]
Select the [Left] / [Right] location of the selected display.
[Make this my main display]
Place a check mark here to set the selected display as the main display.
6.
Select the secondary display in [Display], and set the following items in the same way as
for the primary display.
[Location] is automatically set to the opposite value of the primary display.
Touch panel display connection (USB connection)
A USB type touch panel can be connected to a display. A touch panel allows the presenter to
conduct a smooth dynamic session by simply swiping on the screen to switch the displayed
image.
To connect a touch panel display, in addition to the HDMI connector or DISPLAY PORT
connector connection for sending video, it must also be connected via USB to transmit touch
gesture controls.
Connect the main unit and the display using a USB cable.
To connect two touch panel displays, assign the touch panels to be the main display and second
display using the following procedure.
1.
Connect the main unit to each display using a display cable and USB cable.
2.
Turn on the devices.
3.
Log in as the OS administrator.
4.
Open [Control Panel] – [Hardware and Sound] – [Tablet PC Settings].
68
Advertisement
Table of Contents
