Sony Vision Exchange PEQ-C100 System Integration & Services Manual page 107

Symptom
Pod cannot See "When Pod cannot connect with the main unit" (page 114).
connect with
the main unit.
User device See "When the main unit or a Pod cannot connect with a user device" (page
cannot connect 115).
with the main
unit or a Pod.
HDCP content HDCP is disabled.
cannot be
played on the
main unit.
Wireless LAN There is
connection is interference from
slow. other wireless
devices.
Wireless LAN
connection
frequently
disconnects.
Wireless LAN
Radio signal
connection is
strength of the
unstable.
access point is
weak.
Mirroring or Image does not
Pod sharing appear in content
image displays area of connected
a green screen. device.
The IP address is
the same address
as another device.
Cause
On the [Setting] screen – [HDMI Input] page, place a
check mark in [Enable HDCP].
Certain wireless channels may be congested or
subject to interference.
Refer to the manual of the access point and change
the wireless LAN channel.
If using a 2.4 GHz band wireless LAN channel, install
away from microwave ovens, cordless telephones,
and other devices that use the same frequency band.
Or change to an available 5 GHz band wireless LAN
channel.
Move the installation location of the access point.
Move the access point to a location with fewer visible
objects between it and user devices, or move it to a
location closer to the user devices, then check the
signal strength.
Drag & drop the content from the thumbnail area or
Pod sharing area to the content area of the connected
device to force the display in the content area.
Check that the IP address of the main unit, Pod, or
user device causing this problem does not use the
same address as other devices. Reconfigure the IP
address if the IP address overlaps another device.
107
Solution