Sony Vision Exchange PEQ-C100 System Integration & Services Manual page 24

Pod sharing throughput between main unit and Pods
The video quality settings and maximum throughput values for Pod sharing are given below.
Allow a margin as these values are empirical values only.
The actual throughput will also vary depending on the content matter. Estimate the image
quality setting and network bandwidth that needs to be maintained for the intended use.
When displaying in the content area
As shown in the preceding diagram, content display mirroring simultaneously generates and
displays images in the content area and Pod sharing area.
The image quality for content display Pod sharing is set on the [Setting] screen – [Pod Sharing]
page – [Video quality for Pod Sharing] of the main unit.
For details about operation, refer to the Help Guide.
Image quality
High (default setting)
Mid
Low
When displaying in the Pod sharing area
The throughput when an image is displayed in the Pod sharing area is a maximum of 1 Mbps
when playing video (includes both the video and audio).
Required network bandwidth calculation equations
There are three types of network bandwidth required for Pod sharing.
Network bandwidth that the wireless LAN access point must maintain

Network bandwidth that must be maintained between Pod and layer 2 switch

Network bandwidth that must be maintained between main unit and layer 2 switch

For reference, a sample calculation is described for the following conditions.
User devices: 2 (with image quality set to [High])

Pods: 1

Number of displays connected to the main unit: 1

Margin: 30%

Network bandwidth that the wireless LAN access point must maintain
Calculation equation
Required bandwidth = Total throughput of devices connected to each Pod × Number of Pods
(N )
pod
Resolution
Same as display on
transmitting device
24
Throughput max. value
(when playing video)
6 Mbps
4 Mbps
1 Mbps
Includes video and audio throughput.