Installation/Usage Precautions; Main Unit - Sony Vision Exchange PEQ-C100 System Integration & Services Manual

driver or a device driver with installer from the manufacturer of devices to connect, and install
using the following procedure.
1. Log in as the OS administrator.
2. On the main unit, run Maintenance.exe from the desktop. On a Pod, launch Command
Prompt from the Windows menu.
Command Prompt launches.
3. Install the device driver or run the installer using the Command Prompt commands.
For details, refer to the manuals of the device to connect and the device driver/application.

Installation/Usage Precautions

Main Unit

When installing, ensure that there is sufficient space for ventilation and service tasks.
Do not install in an unstable location.

Do not install in a location that is subject to rain, oil smoke, steam, moisture, or dust.

Do not block the ventilation openings.

Do not push into an enclosed narrow space.

Do not wrap with cloth.

Do not topple sideways.

Do not stack.

Install on a level surface.

About rack mounting
While screw holes are provided on the bottom of the unit for mounting, it is not a

rack-mount recommended device.
If using the screw holes, always mount in a rack or cabinet that can support the weight of

the unit (approx. 3.4 kg (7 lb 8 oz)).
Hole locations on bottom of unit
There are four screw hole locations. The holes are for M3×15 screws.

66