S3/S4 Rotary Switch; Overview; Dc 24 V Voltage Supply - Bosch Rexroth IndraControl VDP 16.1 Project Planning Manual

46/69 Bosch Rexroth AG
Interfaces
7.1.4

S3/S4 Rotary Switch

Overview

7.1.5

DC 24 V Voltage Supply

X13 – 24 V voltage supply
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
Designa‐
tion at the Connection type
housing
XIPC G4 display interface
> connection to control cabi‐
net PC (IPC)
XPS2KB
PS/2 keyboard connection
XPS2MS
PS/2 mouse connection
XDPSLAV
E
PROFIBUS DP connection
Fig.7-2: Interfaces at the VDP 16.1, VDP 40.1 and VDP 60.1
Designation at the
Switch type
housing
BCD rotary switch
for PROFIBUS DP
Switch S3
slave
dress (1-99)
BCD rotary switch
for PROFIBUS DP
Switch S4
slave
dress (1-99)
Fig.7-3: DIP switch on the VDP
The VDP is provided with the required voltages via the G4 display interface of
the control cabinet PC.
If Y-repeaters are used, the VDP must be separately provided with
a voltage of DC 24 V via connection X13. For this an isolated power
supply unit is required.
X13
3 2 1
Fig.7-4: Interface to the control cabinet PC
Pin
1
DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Connector type / in‐
tegrated
D-Sub connector,
25-pin
Mini DIN PS/2 fe‐
male connector,
6-pin
Mini DIN PS/2 fe‐
male connector,
6-pin
D-Sub female con‐
nector,
9-pin
Function
To set the tens digit of the station address
station ad‐
To set the ones digit of the station address
station ad‐
X13
Isolated power
I P ote ntia lfre ie s
1
supply unit
+24 VDC
Ne tzte il
2
GND
3
N.C.
Function
Supply voltage +24 V
Mating connector or
cable (from outside)
D-Sub female con‐
nector,
25-pin
Mini DIN PS/2 con‐
nector,
6-pin
Mini DIN PS/2 con‐
nector,
6-pin
D-Sub connector,
9-pin