Important Instructions On Use; Appropriate Use; Introduction; Areas Of Use And Application - Bosch Rexroth IndraControl VDP 16.1 Project Planning Manual

DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
2

Important Instructions on Use

2.1

Appropriate Use

2.1.1

Introduction

2.1.2

Areas of Use and Application

Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as inten‐
ded, situations causing personal injury as well as material damage can occur.
Rexroth disclaims as manufacturer any warranty, liability or dam‐
ages occurring due to inappropriate use of the products. Further‐
more, Rexroth is not paying any compensation. The user is
responsible for any risks resulting from inappropriate use of the
products.
Before using Rexroth products, the following requirements must be met to en‐
sure appropriate use of the products:
● Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
● Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
● Damaged or faulty products must not be implemented or put into opera‐
tion.
● It must be ensured that the products are installed as specified in the doc‐
umentation.
The Rexroth VDP 16.1/40.1/60.1 displays are passive operating and visuali‐
zation terminals forming a PC-based machine operating terminal when used
with an industrial PC.
NOTICE
The VDP 16.1/40.1/60.1 displays may exclusively be used with the accessories
and add-on components specified in this documentation. Components not
named expressly mentioned must neither be mounted nor connected. The
same applies to cables and conduits.
The products may only be operated with the expressly stated configurations
and component combinations as well as with the software and firmware which
is given and specified in the respective functional description.
Typical areas of application of the VDP 16.1/40.1/60.1 are:
Bosch Rexroth AG
Important Instructions on Use
Physical injury and material damage might re‐
sult from an inappropriate use of the products!
Danger of destruction of the device if not ex‐
pressly stated accessories, add-on compo‐
nents and other components, cables, conduits,
software and firmware is used.
11/69